Forged ASTM A182 F304 F304L Slip On Pipe Flanges F.F. / R.F. And
R.T. Face Type Size1/2'-24'
BOYUE STEEL deal with Austenitic Stainless Steel, Nickel Alloy Steel(Hastelloy
, Monel, Inconel, Incoloy ) seamless and welded pipe and tube
already more than 25 years, every year sell more than 80000 tons of
steel pipe and tube. Our client already cover more than 45
countries, Like Italy, UK, Gernmany, USA, Canada, Chile, Colombia,
Saudi Arabia, Russia, Korea, Singapore, Austrial, Poland, France ,
....And our group branch company and factory have been already
approved by :ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS,
CNNC, ISO9001-2008, ISO 14001-2004.
Super Duplex Steel Flange ASTM A182 F53( S32750 / 1.4410) F55(
S32760 / 1.4501) ,F51 2" 150LB B16.5
Usage:offshore, subsea , platform , oil and petroleum , chemical
industry ,sea water , ...
The slip on flange welding also simplified as SO flange.
It is used by inserting the pipe into the inner hole of flange, as
the flange inner diameter is little bigger than the pipe’s OD, the
parts could be connected by lap welding at the top and bottom of
the flange. Slip on steel pipe flange is normally with raised face
(RF) or flat face (FF), and also available in TG and MFM.
| Type | A 182 F 44 Slip On flange |
| Size | 1/2" to 80" |
| Standards | SO, WN, SW, TH, LJ, BL, PL, etc |
| Material | Carbon Steel Plate Flanges: ASTM A105/A105N, etc Stainless Steel Plate Flanges: ASTM A182 F304/304L/304H, F316/316L, F310, F321, F904L, etc Alloy Steel Plate Flanges: ASTM A182 F1, F5, F9, F11, F22, F91, etc Nickel Alloys Plate Flanges: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel
400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS
No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No.
N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No.
N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No.
N08020), Titanium (Grade I & II). Duplex, Super Duplex Plate Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61, 2205
(UNS No. S31803), 2507 (UNS No.S32750), etc Copper Alloy Plate Flanges: UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500,
UNS No. C 70600 (Cu -Ni- 90/10), C71500 (Cu -Ni- 70/30), etc |
| Surface treatment | Chamfering |
| Applications | Petroleum,chemical,power,gas,metallurgy, shipbuilding,
construction, etc |
Most used pipe flange
Slip on pipe flange is suitable for the lower pressure, general
temperature and normal circumstance pipelines. It is easy to
install and with lower cost/price, has been most used in the common
industries.
Slip-on Flanges
Slip-on flanges are a popular type of pipe flanges. These are type
of flanges that slide over the end of piping and then welded in
place. These flanges are ideal for lower pressure applications.
These are easily fitted and welded into different pipes. Welding
reduces fabrication costs of these pipes. These are available in
wide variety of sizes and applications.
Why slip on flanges are preferred to welding neck flanges?
For many users, slip on flanges continue to be preferred to welding
neck flanges because of the following reasons:
- On account of their initially lower cost.
- The reduced accuracy needed in cutting the pipe to length.
- The greater ease of alignment of the assembly.
- The calculated strength of slip-on flanges under internal pressure
is approximately two-thirds that of welding neck flanges.
How to measure slip-on flanges?
Take the measurements of:
- OD: Outside Diameter
- ID: Inside Diameter
- BC: Bolt Circle
- HD: Hole diameter
Key Features of Slip-On Flanges :
Some important features are as follows:
One size fits all pipe schedules.
Fabricators can more easily cut pipe to length for slip-on flanges.
The smaller thickness of this flange allows for easier alignment of
bolting holes.
They are generally not preferred for high pressure temperature
environments.
Advantages of slip on flanges:
Low cost installation
Less time needed to spent on ensuring the accuracy of the cut pipe
they are somewhat easier to align
the slip-on flanges have low hub because the pipe slips into the
flange before welding
the flange is welded both inside and outside to provide sufficient
strength
they prevent leakage
Product Range-
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
Stainless Steel Slip on Flanges: ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317,
347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super
Duplex stainless steel UNS S32750
Carbon Steel Slip on Flanges : ASTM A 105, ASTM A 181
Alloy Steel Slip on Flanges: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Product Attribute
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ASME B16.5 | Type | SO Flange |
| ModelNumber | Duplex Stainless Steel | Thickness | Sch40s,Sch80s,sch160 |
| Packing | Ply-Wood Cases | Payment | 30%TT+70% Balance |
Supply Ability:30000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally ply wooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Price: | Depending on quantity |
| Minimum Order Quantity | 1 PCS |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 3,0000pcs per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | PLY-WOODEN CASE OR PALLET |
Why Choose Us
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
