UNS N08825 INCOLOY 825 Orifice Flange Orifice Plate Nickel Alloy
Steel 2'-24' Size PN6-PN100
BOYUE GROUP MATERIAL:
Carbon Steel:
Flanges:-ASTM A105/105N; A36; A694 F42-F70; A350 LF1/LF2; P235GH;
P245GH; P250GH; P265GH; P280GH; ST37.2; S235JR; C22.8; CT20; CT3;
SS400; SF390A; SF440A;
Pipe Fittings: ASTM A234 WPB; ST35.8; P265GH; JIS G3452; SS400;
CT20; 09T2C;
Stainless Steel:
Flanges: ASTM A182 F304/304L; F316/316L; F321; F51; 12X18H10T;
10X17H13M2T; SUS F304/F304L; F316/F316L; 1.4301;1.4306; 1.4401;
1.4404; 1.4521; 1.4571;
Pipe Fittings: A403 WP304/304L; WP316/316L; WP317/317L; WP321;
1.4301;1.4306; 1.4401; 1.4404; 1.4521; 1.4571; SUS304/304L;
SUS316/316L; SUS321; 08X18H10; 03X18H11; 12X18H10T; 10X17H13M;
10X17H13M2T
1. Alloy 20 orifice flanges brief introduction
Orifice Flanges are used with orifice meters for the purpose of
measuring the flow rate of either liquids or gases in the
respective pipeline. Pairs of pressure "Tappings", mostly on 2
sides, directly opposite each other, are machined into the orifice
flange. This makes separate orifice carriers or tappings in the
pipe wall unnecessary.
Orifice Flanges generally come with either Raised Faces or RTJ
(Ring Type Joint) facings. They are, for all intensive purposes,
the same as weld neck and slip on flanges with extra machining.
The image on the right shows a set Orifice Flanges, where a
Orifice Plate is mounted and a jack screw is machined. This jack
screw is used to facilitate separating the flanges for inspection
or replacement of the Orifice Plate and gaskets.
The range of orifice flanges covers all standard sizes and ranges,
and all common flange materials. Flanges are available in Welding
Neck, Slip On, and Threaded form, and are typically supplied with
two 1/2" NPT tappings in each flange.
| Standard | Type | Class | Size |
| ASME B16.5 | WN/LWN/SO/Blind/Lap Joint | 150#-2500# | 1/2"-24" (Except Blind Flange 2500lb 1/2"-12") |
| SW flange | 150#-1500# | 1/2"-3" (Except 1500# 1/2"-2 1/2") |
| Threaded | 150#-900# | 1/2"-24" |
| 1500# 2500# | 1/2"-2 1/2" |
| ASME B16.47 Series A | WN/blind flange | 150# -900# | 22"-48" (Except 900# Size:26"-48") |
| ASME B16.47 Series B | WN/blind flange | 75#-300# | 26"-48" |
| 400# 600# 900# | 26"-36" |
| DIN2527 | Blind flange | PN6-PN100 | DN10-DN1000 |
| DIN2543 | SO flange | PN16 | DN10-DN1000 |
| DIN2544 | SO flange | PN25 | DN10-DN1000 |
| DIN2545 | SO flange | PN40 | DN10-DN500 |
| DIN2565 | Threaded flange with Neck | PN6 | DN6-DN200 |
| DIN2566 | Threaded flange with Neck | PN16 | DN6-DN150 |
| DIN2567 | Threaded flange with Neck | PN25 PN40 | DN6-DN150 |
| DIN2568 | Threaded flange with Neck | PN64 | DN10-DN150 |
| DIN2569 | Threaded flange with Neck | PN100 | DN10-DN150 |
| EN1092-1:2002 | Plate flange for welding/ loose plate flange with weld-on plate collar or for lapped pipe end/Blind Flange/WN flange | PN2.5-PN100 | DN10-DN4000 |
| JIS B2220 | Welding flange, lap joint flange, threaded flange | PN6-PN100 | DN10-DN1500 |
| BS4504 BS10 TableD/E | Plate Flange for welding/ WN flange/blank Flange | PN6-PN100 | DN10-DN1500 |
| Other Products | Anchor/swivel/girth/l ap joint/reducing/orifice |
Spectacle blind/paddle blind/ spacer ring/orifice plate/bleed ring |
Special Products: rings/ forgings/disc/shaft sleeves |
| Sealing Surface | RF FF RTJ TF GF LF LM |
| Flange Face Finish | Stock finish/spiral serrated/ concentric serrated/smooth finish (Ra 3.2 and 6.3 micrometers) |
| 125-250 AARH(it is called smooth finish) |
| 250-500 AARH(it is called stock finish) |
| Coating | Vanish, yellow paint, anti-rust oil, galvanizing etc |
| Material Grade | Nickel Alloy Steel | ASTM/ASME B/SB564 UNS N02200(NICKEL 200), UNS N04400(MONEL 400), |
| UNS N08825( INCOLOY 825),UNS N06600(INCONEL 600), |
UNS N06601(INCONEL 601), UNS N06625(INCONEL 625), UNS N10675(HASTELLOY C276), |
ASTM/ASME B/SB160 UNS N02201(NICKEL 201), ASTM B/SB472 UNS N08020(Alloy 20) |
| Copper Alloy | ASTM/ASME B/SB151 UNS C70600(CuNi 90/10), C71500(CuNi 70/30) |
| Stainless Steel | ASTM/ASME A/SA182 F304,304L,304H,309H,310H, 316,316H,316L,316LN, |
| 317,317L,321,321H,347,347H |
| Duplex and Super Duplex Steel | ASTM/ASME A/SA182 F44,F45,F51,F53,F55,F60,F61 |
| Carbon steel | ASTM /ASME A/SA105(N) |
| Low Temp Carbon Steel | ASTM/ASME A/SA350 LF2 |
| High Yield Carbon Steel | ASTM/ASME A/SA694 F52,F56 F60, F65, F70 |
| Alloy Steel | ASTM/ASME A/SA182 GR F5, F9, F11,F12,F22,F91 |
| Titanium | ASTM/ASME B/SB381 Grade 2, Grade 5, Grade 7 |
2. Alloy 20 orifice flange dimensioin
| RANGE | 1" TO 24” |
| CLASS | 300# FOR WN, SO and threaded flange 600#, 900#, 1500#, 2500# FOR WN FLANGE |
| FORMS | Weld Neck Flanges, Slip On Flanges, threaded flange |
| STANDARD | ANSI B16.36 covers Dimensions and dimensional tolerances from
orifice flanges (similar to those covered in ASME b16.5) that have
orifice pressure differential connections. Coverage is limited to
the following flanges: |
| Grade | Hastelloy: HastelloyB3/B2/X/C/C22/C276/G-30
Inconel: inconel600/625/718/725,
Incoloy: incoloy800/800h/825/925,
Monel: monel400/k500/404,
Nickel: nickel200/201,
Nitronic: Nitronic50/60,
Alloy: Alloy20/28/330/31/33/75, 4J36/1J50/1J79/4J29/4J42,/3J53
Nimonic: nimonic80/80a/90/75, ETC. |
| Price Term | EXW/FOB/CFR/CIF/FCA |
| Package | Wooden case /Wooden crate |
| Delivery time | 40 Days |
3. Alloy 20 orifice flange ASTM Specifications
INCOLOY® alloy 20, Carpenter® 20 alloy, 20CB-3®
INCOLOY® is a registered trademark of the Special Metals
Corporation group of companies.
Carpenter® and 20CB-3® are registered trademarks of Carpenter.
Alloy 20 is a nickel-iron-chromium based, austenitic alloy with
excellent corrosion resistance in chemical environments containing
sulfuric acid and many other aggressive media. This alloy is
stabilized with niobium to resist intergranular corrosion. Alloy 20
may provide potential cost savings when carefully compared to
higher nickel-based alloys, while out performing standard stainless
steels.
Industries and Applications
Alloy 20 is used in a variety of industries, including chemical
processing, petrochemical and refining, marine, pharmaceutical and
food processing. End use applications include storage tanks, mixing
tanks, agitators, pump and valve parts, food processing equipment,
fasteners and fittings. Applications are limited to a maximum
temperature of 1000°F per ASME. It is also important to determine
if the necessary corrosion resistance can be achieved within the
given environment.
Chemical Composition (%):
| Iron | Nickel | Chromium | Copper | Molybdenum | Manganese | Niobium* + Tantalum |
| Remainder | 32.00 to 38.00 | 19.00 to 21.00 | 3.00 to 4.00 | 2.00 to 3.00 | 2.00 max | (8 x C) to 1.00 |
| Silicon | Carbon | Phosphorus | Sulfur | | | |
| 1.00 max | 0.07 max | 0.045 max | 0.035 max | | | |
*Niobium (Nb) formerly classified as Columbium (Cb).
Applicable Specifications*
| Form | ASTM | ASME |
| Bar | B473 | SB473 |
| Sheet & Plate | B463 | SB463 |
| Seamless Pipe & Tube | B729 | SB729 |
| Welded Pipe | B464, B4741 | SB464, SB474 |
| Welded Tube | B468 | SB468 |
4. Alloy 20 orifice flange are matched with gasket, fasteners,
orifice plate
Product Attribute
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Orifice Flange |
| ModelNumber | Alloy 20 | Thickness | #150,#300,#600,.#900,#1500,#2500 |
| Packing | Ply-Wood Cases | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000pcs per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | PLY-WOODEN CASE OR PALLET |
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
